Swing Gates Mechanisms

Unlike the sliding motors, the swing gates mechanisms are more difficult to install and require precision and different methodology for each manufacturer's instructions. Our company cooperates with many well-known foreign companies and has great knowledge in the installation of motors in opening gates.

Firstly, it is important for a technician to examine the door, that the swing gate operations will be placed, in order to ascertain the conditions that are required for the mechanisms to function smoothly and without difficulties. It is a good idea for the customer to contact us before ordering the door or designing it to solve all the differences and requirements together and propose the most appropriate solution. It is common for customers to come to us with a finished door, who have not computed the requirements of the mechanisms or the degrees that they want to make or even have built completely inappropriate doors, in which no mechanism can be placed.

Do not trust the door manufacturer, because he may not be familiar with mechanisms. Come to us before the construction to plan and design the door together.

Requirements for swing gates operations.

The most important requirements that you need to be careful is the distance X (from 13cm up to 30cm) and the Y (from 13cm up to 30cm) so that our mechanisms make the necessary degrees, to push our door properly and to work well and rested.

Each mechanism has its own requirements. When the manufacturer's requirements are not met, the device works difficulty and it will wear down faster.

An important criterion for selecting a mechanism is the morphology of the door. The length and kilos are the most important criteria after that follows the design of the door. A different mechanism will be placed on an open type door with and a different in a “blind“ one that does not expel the air. We may have a lightweight door of 2.00 m length but be blind and requires a much larger mechanism than prescribed, because the air that is developing makes it difficult to close and open the door.

It is also advisable for the door to have a mechanical stop on the door closure. Otherwise, the mechanisms will not pressed the door at the end and the control board will get confused because it will not have the same closure point.

Swing gates motors:

1)SOMFY.

Motor for swing gates 230Vac type ΙΧΕΝGO for gates up to 4 m and 400kg per leaf. Available in 2 types the S for doors up to 2m and the L for doors up to 4m. Manual operation with a special key.

Reliable motors from the Frances company Somfy.

2)ΜPC .

Motor for swing gates 230Vac type ΤΙΤΑΝ for doors up to 4,5 m and 300 kg per leaf. Available in e types the titan 300 for gates up to 2m- the titan 400 for gates up to 3m- the titan 600 for gates up to 4,5m. With manually use with a special key.

Reliable mechanism in a very good price.

   3. ΒΕΝΙNCA

Motor for swing gates 230Vac type BOB 50 for doors up to 5,00 m and 400 kg per leaf. Manually use with a special key.

Reliable mechanism from big gates for industrial use.

  4. BFT

Motor for swing gates type ATHOS AC 40  for doors up to 4,00 m and 400kgr per leaf. Manually use with a special key.

Reliable mechanism in a very good price.

Hydraulic motor for swing gates 230Vac type P7-4,5 for doors up to 7,00 m and 500kg weight per leaf for industrial use. The motors are available after request. The mechanism is reversible and an electromagnetic lock is required for locking.

SPECIAL MOTORS FOR SWING GATES

1. Electromechanical motors with articulated arm.

Our company has many solutions for swing gates. We have huge variety in motors and accessories and we are able to satisfied all the custumers.

Swing gates motors from Somfy type Αxovia from gates from 200 up to250kg, with maximum length per leaf up to 2,50m.

Swing gates motor from ΟΚΕΥ for doors up to 200kg and maximum length per leaf 4,00m.

Swing gates motor from VDS type XNODO for doors up to 200kg and maximum length per leaf 3,00m.

2)Underground operators.

Underground operators and hydraulic motors for swing gate from the German company HORMANN available in 2 versions DTU250 for door widths 2,50m and 500kg and DTH700 for door length 7,00m and 1000kg weight

Special structures with swing gates operations.

Installation of swing gates operations in modified sectional door from HORMANN.

INSTALLATION OF swing door operations IN A DOUBLE leaf DOOR WITH SPECIAL lower driver

Accessories for swing doors operations

Control units for single or double leaf swing doors

All the units have a protective plastic box and have frequency receivers from 433,92 up to 868 MHZ. They are able to take commands from up to 150 remote controls with rolling and untraceable code. They also provide:

• Motor torque control

• Slow speed time setting

• Automatic closing setting

• Input for automatic opening device such as motion tracking device, inductive loop detectors or infrared sensors

• Diagnostic LED for installation and working test

Electromagnetic looks for double leaf swing gates operations

The electromagnetic looks are required in big and heavy gates, when we need extra security and we have installed reversible mechanism.

For more info in electrical accessories click her

Our company is committed to the quality of the mechanisms that is proposes and gives customers written warranty for them. We stock motors from the biggest companies and also have spare parts and accessories to cover any customer's needs. Below we present a small sample of our already installed motors for swing gates.